Standards for Parking Lot for the Disabled
If you go to the parking lot, you will see a marked handicapped parking lot.
It is not installed arbitrarily, but is made according to a set installation standard. 장애인 주차장
Today, I would like to briefly find out what the criteria for installing a parking lot for the disabled are. 좋은뉴스
If you are curious about the criteria for installing a parking lot for the disabled, as well as related information, please read the article below.
First, let’s look at the legal standards for installing disabled parking lots. First, the installation location is described.
In the case of a parking lot attached to a building and a parking lot in subparagraph 2 (1) of Appendix 1 of the Enforcement Decree, the parking area for the disabled must be installed at the entrance of the building accessible to the disabled or the closest to the lift facility for the disabled.
In addition, the passageway from the disabled parking area to the building entrance or elevator facility for the disabled,
It is said that the height difference should be eliminated as much as possible and the effective width should be 1.2m or more so that the disabled can pass.
Second is the parking space. The size of the parking space for the disabled must be at least 3.3m wide and 5m long for each parking space.
However, in the case of parallel parking, it is said that the width of 2m / length of 6m or more per parking lot.
The floor of the parking space must not have a height difference that hinders getting on and off, such as the disabled, and the slope can be less than 1/50.
The surface of the parking space floor must be finished with a non-slip material.
The next third is guidance and guidance signs. There must be a handicap-only sign on the floor of the handicapped-only parking area.
In addition, parking area lines and floor surfaces should be displayed in colors that are easy for drivers to identify.
It is said that the handicap-only parking area information sign should also be attached/installed in an easily identifiable place in the parking lot.
Guide sign standards are 0.7m wide/0.6m long, and the height from the ground to the sign is 1.5m.
The information to be written on the information sign is that parking is allowed only when a person with a walking disability is riding in a car with a disabled car sign attached, and those who violate this may be fined up to 100,000 won, and the person who discovers the violation is reported phone number, etc.
You can draw a report mark outside the disabled-only parking area to identify it as a disabled-only parking area.
Next, we will inform you of the considerations during installation.
For people with walking disabilities, wheelchairs and cars are part of the body and play an important role in replacing lost bodily functions.
Without it, it is not only impossible to move, but in many cases, life itself is impossible, so the parking area for the disabled is an essential facility and is the only convenience facility that cannot be used with the general public.
As mentioned above, the parking lot for the disabled must be installed in a place closest to the entrance with an elevator, etc., and the safe access passage separated from the roadway must be connected to the main entrance.
If possible, it is desirable to install a roof, and a picture must be added to the front/side of the floor of the parking lot for the disabled with a floor size of 1/2.
These are the details of the installation standards for disabled parking lots. The installation location must be in a conspicuous place.
A place that is protected from snow and rain is the best place.
The size of the parking area must be at least 350 cm wide (parking width 230 cm + passage 120 cm) and at least 330 cm.
In the case of a parking area narrower than 330 cm, it is said to be effective even when at least 120 cm on one side faces an access road, etc. In the case of parallel parking on a sidewalk with an effective width of 150 cm or more, it can be 600 cm in length and 200 cm in width.
Above is a description of the parking area sign. The floor of the parking area must be marked with a parking lot for the disabled that can be identified.
In front of the parking area, a standing sign for a parking lot for the disabled is erected, but if there are more than 3 parking areas, the corresponding parking area is displayed.
If a 120cm passageway is shared by left and right parking areas with a parking width of 230cm, the parking section and the passageway must be marked separately. You must indicate your registration number.
If the driver is a wheelchair user, there is a risk of collision with passing vehicles, so it is recommended to refrain from parallel parking in on-street parking whenever possible.
At the entrance of the parking lot, there must be a sign indicating the parking area for the disabled with a height of 150cm ~ 180cm.
From the entrance of the parking lot to the exclusive parking area, guidance signs should be placed in easy-to-identify locations.
The passageway from the disabled parking area to the main entrance must be completely separated from the roadway, giving priority to pedestrian traffic and ensuring safety.
When passing through a lane in a parking lot, it is said that a safe passage marked with a pedestrian priority passage sign must be installed.
The above picture is an example of a model installation of a parking area for the disabled, so it would be nice to refer to it.
So far, we have looked at various information as well as the standards for installing parking lots for the disabled.